Regulator

Our Products

R1 series – Sizes : G1/4, G3/8, G1/2, 3/4, 1

  • Conform to ISO 6953 – 1
  • Suitable for panel and modular mountings
  • Non raising Press to Lock adjusting knob for locking at any set pressure
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated in models R14, R15 and R17 (with venturi) for faster response
  • Good flow and regulating characteristics
  • Note the direction of flow before installation and connect piping accordingly.
  • Flush pipings for dirt, dust, rust and other foreign particles.
  • Install in clean atmosphere.
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer.
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons.

Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. (Turning the knob counter clockwise will reduce the pressure)

Inquiry Now