Gas Solenoid Valve
Our Products
Menu
Valve Information
Port:
Refer below technical data sheet (Available BSP)
End Connection:
Screwed
Body Material:
Aluminum Pressure Die Cast
Media Temp:
-10° C to 60° C
Diapharagm:
Nitrile (NBR)
Circumstance Temp:
-30° C to 70° C
Media:
Air, Natural Gas, Town Gas, Air.
Main Features:
Flow adjustment, Opening time adjustment, Quick release initial flow adjustment
Operating Voltage & Power Consumption:
| 110AC | 230AC | 12DC | 24DC |
| 30W | 30W | 30W | 31W |
Other Specification Data:
Available on Request
Coil Information
Coil Features:
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require..
Coil Housing:
Epoxy square coil.
Note:
Use of filter in the inlet port is recommended.
Coils are conforming as per IEC-60335-1 with derivatives (LVD / EMC).
Gas Solenoid Valve complies as per EN-161 requirement.
Pneumatic Circuit Diagram
Identification Chart Of Solenoid Valve Uflow Automation
Technical Data
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure mbar | Max. Operating Pressure mbar | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| DAN213 | Aluminium | ½” | 15 | 0 | 500 | NBR | 4 |
| DAN408 | Aluminium | 1” | 30 | 0 | 350 | NBR | 13 |
Identification Chart Of Solenoid Valve Uflow Automation
Diagram & Dimension (NC)
| Model No. | Port Size | Diagram No. | A | B | C | D | E | E1 |
|---|---|---|---|---|---|---|---|---|
| DAN213 | ½” | 20.1 | 72 | 147 | 118 | 70 | 50 | 62 |
| DAN408 | 1” | 20.2 | 108.50 | 164.50 | 130.50 | 85 | 74 | 105 |
Note:- All dimensions are in mm.
