2/2 Way Direct Acting Valve (NC/NO)

2/2 Way Direct Acting Valve (NC/NO)

Our Products

Valve Information
Port:

Refer below technical data sheet (Available BSP / NPT)

End Connection:

Screwed

Body Material:

SS ASTM A351 Grade CF8 / CF8M, Forged Brass, Aluminium

Media Temp & seal o ring:
Nitrile(NBR)EPDMViton(FKM)PTFE
-30°Cto90°C-10°Cto140°C-10°Cto180°C-10°Cto180°C
Circumstance Temp:

-10° C to 70° C

Media:

Air, Chemical, Gas, Oil, Steam, Hot Water, Oil.

Main Features:

Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals,Chemical application & Highly corrosive environment.

Operating Voltage & Power Consumption:
24AC110AC230AC12DC24DC
7W8W8W/17W10W11W
Optional Feature:

90% Power saver series also available

Other Specification Data:

Available on Request

Coil Information
Coil Features:

High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require.

Coil Housing:

Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.

Note:

Use of filter in the inlet port is recommended.

Pneumatic Circuit Diagram

Identification Chart Of Solenoid Valve Uflow Automation

Technical Data

Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & ‘O’ Ring Material Flow Factor Kv m³ / hr
NC NO NC NO
DCN1D CF8 / CF8M / BRASS / ALUMINUM ¼” 5 0 4 NBR / SI / FKM / EPDM 0.73
DCN2D CF8 / CF8M / BRASS ½” 5 0 4 NBR / SI / FKM / EPDM 0.73
DBN7D BRASS ⅜” 5 0 4 NBR / SI / FKM / EPDM 0.73
DCN034 SS 304 / SS 316 / BRASS ⅛” 1.6 0 7 NBR / SI / FKM / EPDM 0.09
DBN040 BRASS ⅛” 2 0 10 NBR / SI / FKM / EPDM 0.11
DBN140 BRASS ¼” 2 0 10 NBR / SI / FKM / EPDM 0.11
DBN1D0M BRASS ¼” 2.8 0 4 NBR / SI / FKM / EPDM 0.18
DCN14 CF8 / CF8M / BRASS ¼” 4 2.5 0 10 NBR / SI / FKM / EPDM 0.54 0.16
DCN24 CF8 / CF8M / BRASS ½” 4 2.5 0 10 NBR / SI / FKM / EPDM 0.54 0.16
DBN74 BRASS ⅜” 4 2.5 0 10 NBR / SI / FKM / EPDM 0.54 0.16
DAN14 ALUMINUM ¼” 3 2.5 0 10 NBR / SI / FKM / EPDM 0.20 0.16
DAN243 ALUMINUM ½” 5 0 10 NBR / SI / FKM / EPDM 0.73
DCN223 CF8 / CF8M ½” 12 0 2 NBR / SI / FKM / EPDM 1.80
DCN15 CF8 / CF8M / BRASS ¼” 3 2.5 0 16 NBR / FKM / EPDM 0.20 0.16
DCN25 CF8 / CF8M / BRASS ½” 3 2.5 0 16 NBR / FKM / EPDM 0.20 0.16
DBN75 BRASS ⅜” 3 2.5 0 16 NBR / FKM / EPDM 0.20 0.16
DAN15 ALUMINUM ¼” 2.5 1.8 0 16 NBR / FKM / EPDM 0.16 0.10
DCN1B CF8 / CF8M / BRASS ¼” 2.5 1.8 0 25 NBR / FKM / EPDM 0.16 0.10
DCN2B CF8 / CF8M / BRASS ½” 2.5 1.8 0 25 NBR / FKM / EPDM 0.16 0.10
DBN7B BRASS ⅜” 2.5 1.8 0 25 NBR / FKM / EPDM 0.16 0.10
DAN1B ALUMINUM ¼” 2.2 1.8 0 25 NBR / FKM / EPDM 0.16 0.10
DCN1J CF8 / CF8M / BRASS ¼” 2 1.3 0 40 NBR / FKM / EPDM 0.11 0.05
DCN2J CF8 / CF8M / BRASS ½” 2 1.3 0 40 NBR / FKM / EPDM 0.11 0.05
DBN7J BRASS ⅜” 2 1.3 0 40 NBR / FKM / EPDM 0.11 0.05
DAN1J ALUMINUM ¼” 1.8 1.3 0 40 NBR / FKM / EPDM 0.10 0.05
DCN1H CF8 / CF8M / BRASS ¼” 1.8 1.3 0 60 NBR / FKM / EPDM 0.10 0.05
DCN2H CF8 / CF8M / BRASS ½” 1.8 1.3 0 60 NBR / FKM / EPDM 0.10 0.05
DBN7H BRASS ⅜” 1.8 1.3 0 60 NBR / FKM / EPDM 0.10 0.05
DAN1H ALUMINUM ¼” 1.5 1.3 0 60 NBR / FKM / EPDM 0.10 0.05
DAN1H ALUMINUM ¼” 1.5 1.3 0 60 NBR / FKM / EPDM 0.10 0.05
DCN1L CF8 / CF8M / BRASS ¼” 1.8 1.3 0 100 NBR / FKM / EPDM 0.10 0.05
DCN2L CF8 / CF8M / BRASS ½” 1.8 1.3 0 100 NBR / FKM / EPDM 0.10 0.05
DBN7L BRASS ⅜” 1.8 1.3 0 100 NBR / FKM / EPDM 0.10 0.05
DCN1C CF8 / CF8M / BRASS ¼” 1.3 0 150 NBR / FKM / EPDM 0.05
DCN2C CF8 / CF8M / BRASS ½” 1.3 0 150 NBR / FKM / EPDM 0.05
DBN7C BRASS ⅜” 1.3 0 150 NBR / FKM / EPDM 0.05
NOTE: Model number will change in case of normally open valve.
Identification Chart Of Solenoid Valve Uflow Automation

Diagram & Dimension (NC)

Model No. Port Size Diagram No. A B C E E1
DAN14 ¼” 16.1 44.50 81 71 44 57
DBN14 ¼” 16.1 43 83 74 44 57
DCN14 ¼” 16.1 43 83 74 44 57
DBN74 ⅜” 16.1 48 88 75 44 57
DBN24 ½” 16.1 48 88 75 44 57
DCN223 ½” 16.1 61.50 109 96 44 57
DAN243 ½” 16.1 65 102 88 44 57
DBN040 ⅛” 16.1 38 56 47 28 33
DBN130M ¼” 16.1 34 69 46 28 33
DCN24 ½” 16.1 48 91 79 44 57
DCN034 ⅛” 16.1 27 50 43 21 51
Note:- All dimensions are in mm.
Identification Chart Of Solenoid Valve Uflow Automation

Inquiry Now